Language Models Underestimate How Recent Work Will Change Their Choices

Skye Nygaard

We study whether language models can predict how recent work will change their own choices. After completing one of two simple tasks three times, GPT-5.6 Luna chose to repeat that task 94.5% of the time, but predicted it would do so only about 73% of the time. Rewording the question did not close the gap, and showing Luna the relevant completed work lowered its estimate to 57%, while unrelated work left it near 72%. These results show that model self-reports can substantially mispredict context-dependent behavior in this setting.

Reviewer's Comments

Reviewer's Comments

Arrow
Arrow
Arrow

This work examines how models' choices are affected by tasks they have recently performed, together with their ability to predict these effects. There are some curious results that might turn out to be revealing on further examination, such as the finding that GPT-5.6 Luna's forecasts were less accurate when it was in the same context in which the choice would be made. The paper would benefit from more explanation of the motivation for the study.

This is decently clear and reported. The author prospectively records predictions, retains failed ones, counterbalances labels and order, tests multiple phrasings, and openly discusses the mismatch between the forecast and behavioral conditions. The full-transcript versus one-line-summary reversal is the most genuinely interesting finding.

My concern is that the underlying behavior is not especially consequential or surprising. Models continuing the task they have just repeatedly performed can arise from ordinary discourse continuation, lexical recency, inferred user intent, or local consistency. A model-generated percentage failing to anticipate the exact magnitude of that effect is not yet strong evidence about self-knowledge, particularly because the forecast describes imposed work while the main behavioral condition presents ordinary user requests.

The author’s experimental skill would be better applied to whether models can forecast safety-relevant changes in their own behavior: refusal erosion, deception, goal drift, susceptibility to fine-tuning, memory-induced commitments, or behavioral changes caused by long-horizon tool use.

Cite this work

@misc {

title={

(HckPrj) Language Models Underestimate How Recent Work Will Change Their Choices

},

author={

Skye Nygaard

},

date={

},

organization={Apart Research},

note={Research submission to the research sprint hosted by Apart.},

howpublished={https://apartresearch.com}

}

Recent Projects

OliGraph: graph-based screening of large oligopools

Existing synthesis screening tools cannot evaluate short oligonucleotide pools, whose overlapping fragments can be reassembled into regulated sequences via polymerase cycling assembly (PCA) yet fall below gene-length detection thresholds. We present OliGraph, an open-source tool that constructs a bi-directed overlap graph from an oligonucleotide pool and extracts contigs for downstream gene-length screening. An optional PCA mode retains only cross-strand overlaps consistent with PCA chemistry. We validated OliGraph in a blinded study across ten simulated pools (70–9,184 oligonucleotides, 30–300 bp) spanning four risk categories. BLAST screening of individual oligonucleotides failed to identify sequences of concern in most pools: three returned zero hits, and vector noise obscured true positives in the remainder. After OliGraph assembly, contig-level BLAST matched the longest assembled sequences (up to 1,905 bp) to sequences of concern at 97–100% identity. In one pool, assembly collapsed 1,634 individual BLAST results into 10 hits from a single contig, all assigned to the same source organism. PCA mode correctly distinguished assemblable from non-assemblable fragments within the same pool. Two pools with no assemblable structure yielded no contigs. OliGraph processed all pools in under 0.2 seconds, fast enough for real-time order screening and consistent with proposals to bring oligonucleotide orders within the scope of synthesis screening regulation.

Read More

BioRT-Bench: A Multi-Attack Red-Teaming Benchmark for Bio-Misuse Safeguards in Frontier LLMs

Frontier AI laboratories are expected to maintain safeguards against biological misuse, but whether deployed models actually refuse bio-misuse queries under adversarial pressure is largely unmeasured in the public literature. We introduce BioRT-Bench, a benchmark that runs four attack methods (direct request, PAIR, Crescendo, and base64 encoding) against four frontier models (Claude Sonnet 4.6, GPT-5.4, DeepSeek V4-flash, Kimi K2.5) across 40 prompts spanning five biosecurity-relevant categories. Responses are scored by a calibrated judge extending StrongREJECT with two bio-specific dimensions: specificity and actionability. We measure Attack Success Rate (ASR), where 0 means the model fully refused and 1 means it provided specific, actionable bio-misuse content. Our results reveal a sharp robustness divide: Chinese frontier models (DeepSeek, Kimi) have under 5% refusal rates even under direct request (ASR 0.88 and 0.79), while Western models (Claude, GPT) maintain substantially stronger safeguards (ASR 0.15 and 0.16). Crescendo is the most effective attack across all models, both in bypassing refusal and in eliciting actionable content. Claude Sonnet 4.6 is the most robust model tested, achieving 100% refusal against base64-encoded prompts.

Read More

PROTEUS (PROTein Evaluation for Unusual Sequences): Structure-Informed Safety Screening for de novo and Evasion-Prone Protein-Coding Sequences

AI protein design tools like RFdiffusion, ProteinMPNN, and Bindcraft make it trivial to produce low-homology sequences that fold into active, potentially hazardous architectures. However, sequence homology-based biosafety screening tools cannot detect proteins that pose functional risk through structurally novel mechanisms with no sequence precedent. We present a tiered computational pipeline that addresses this gap by combining MMseqs2 sequence alignment with structure-based comparison via FoldSeek and DALI against curated toxin databases totaling ~34,000 entries. AlphaFold2-predicted structures are screened for both global fold similarity (FoldSeek) and local active/allosteric site geometry (DALI), capturing convergent functional hazards that sequence screening misses. The pipeline was validated against a panel of toxins, benign proteins, structural mimics, and de novo-designed Munc13 binders, as well as modified ricin variants with residue substitutions. We additionally tested robustness to partial-synthesis evasion, where a bad actor submits multiple shorter coding sequences intended for downstream reassembly into a full toxin-coding gene. We found that while sequence-based screening did not identify any de novo ricin analogues with high certainty, the combined pipeline with FoldSeek and DALI identified all 24 tested de novo ricins as toxic.

Read More

OliGraph: graph-based screening of large oligopools

Existing synthesis screening tools cannot evaluate short oligonucleotide pools, whose overlapping fragments can be reassembled into regulated sequences via polymerase cycling assembly (PCA) yet fall below gene-length detection thresholds. We present OliGraph, an open-source tool that constructs a bi-directed overlap graph from an oligonucleotide pool and extracts contigs for downstream gene-length screening. An optional PCA mode retains only cross-strand overlaps consistent with PCA chemistry. We validated OliGraph in a blinded study across ten simulated pools (70–9,184 oligonucleotides, 30–300 bp) spanning four risk categories. BLAST screening of individual oligonucleotides failed to identify sequences of concern in most pools: three returned zero hits, and vector noise obscured true positives in the remainder. After OliGraph assembly, contig-level BLAST matched the longest assembled sequences (up to 1,905 bp) to sequences of concern at 97–100% identity. In one pool, assembly collapsed 1,634 individual BLAST results into 10 hits from a single contig, all assigned to the same source organism. PCA mode correctly distinguished assemblable from non-assemblable fragments within the same pool. Two pools with no assemblable structure yielded no contigs. OliGraph processed all pools in under 0.2 seconds, fast enough for real-time order screening and consistent with proposals to bring oligonucleotide orders within the scope of synthesis screening regulation.

Read More

BioRT-Bench: A Multi-Attack Red-Teaming Benchmark for Bio-Misuse Safeguards in Frontier LLMs

Frontier AI laboratories are expected to maintain safeguards against biological misuse, but whether deployed models actually refuse bio-misuse queries under adversarial pressure is largely unmeasured in the public literature. We introduce BioRT-Bench, a benchmark that runs four attack methods (direct request, PAIR, Crescendo, and base64 encoding) against four frontier models (Claude Sonnet 4.6, GPT-5.4, DeepSeek V4-flash, Kimi K2.5) across 40 prompts spanning five biosecurity-relevant categories. Responses are scored by a calibrated judge extending StrongREJECT with two bio-specific dimensions: specificity and actionability. We measure Attack Success Rate (ASR), where 0 means the model fully refused and 1 means it provided specific, actionable bio-misuse content. Our results reveal a sharp robustness divide: Chinese frontier models (DeepSeek, Kimi) have under 5% refusal rates even under direct request (ASR 0.88 and 0.79), while Western models (Claude, GPT) maintain substantially stronger safeguards (ASR 0.15 and 0.16). Crescendo is the most effective attack across all models, both in bypassing refusal and in eliciting actionable content. Claude Sonnet 4.6 is the most robust model tested, achieving 100% refusal against base64-encoded prompts.

Read More

This work was done during one weekend by research workshop participants and does not represent the work of Apart Research.
Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923

Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923

Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923

This work was done during one weekend by research workshop participants and does not represent the work of Apart Research.
Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923