Whose Preference Are We Measuring? Human-AI Dyads as a Unit of Preference Elicitation

Ariella Shulman

We introduce Dyadic Preference Elicitation: adapting pairwise preference measurement to compare human and model baseline choices with the ordering they jointly produce after deliberation. While existing alignment methods usually elicit model preferences in isolation, real-life decisions are often produced through sustained human–AI interaction. To demonstrate this, we independently elicited human and model choices over all ten pairs of five possible outcomes, had the dyad deliberate, and reported dyadic outcomes. We found that the final dyadic ordering exactly matched the human baseline and was approximated by a human-heavy aggregation of the two baselines. This pilot therefore supports human transmission as an observed effect. Other possible effects that should be studied include AI transmission, aggregation, and candidate transformation. Our work strongly suggests that alignment and welfare methods should consider the emergent effects of human-AI collaboration when eliciting model preferences.

Reviewer's Comments

Reviewer's Comments

Arrow
Arrow
Arrow

The framework is the real contribution: separating human, model, and post-deliberation choices can expose deference that static preference tests miss. The pilot result is not currently auditable. Recomputing the public `pilot_data.csv` gives one human change, five model changes, and a nontransitive final relation with two three-cycles—not the paper's 0/10, 4/10, or final ordering identical to the human baseline. The paper mentions a rerun after protocol deviation, but the repository shows neither the analyzed rerun nor an exclusion record. Fix that provenance first. Then test across multiple humans and models with repeated baselines, reversed options, no-deliberation and advocacy controls, and blinded coding.

The reframing is the contribution and it is a good one. Asking which system — model, human, or dyad — produced a choice is a question the elicitation literature mostly skips, and the transmission / aggregation / transformation taxonomy gives it operational teeth. The conceptual discipline throughout is better than almost anything I read in this track: "dyad" is explicitly defined as task-bounded and not a unified mind, distributed cognition is cited as motivation while being denied evidential weight, and the welfare section draws the right distinction between a model deferring and a model consenting. You also name deference as the leading alternative explanation for your own result in the conclusion, unprompted. That is the correct instinct and it is rarer than it should be. The arithmetic checks out too: win scores sum to 10 in every condition, the human and model orderings differ on exactly the four pairs that flipped, and the equal-weight aggregate reproduces 8.5/10 as stated.

The difficulty is that the design cannot distinguish the finding from its own null. Ten comparisons, one dyad, four model changes — and every one of the four went the same direction, toward the human. Consider what a model with no stable preference at all would produce under this protocol: a stochastic baseline, then after ten turns of deliberation with a human who never yields, agreement. That predicts precisely your data. "Human transmission" and "the model had no position to transmit" are observationally identical here, and the paper's framing leans toward the first without being able to exclude the second. Your limitations section says something close to this, but the abstract and conclusion still report human transmission as the supported effect.

The single cheapest fix, worth more than any additional dyad: re-ask the model each of the ten baseline pairs three to five times in fresh contexts. If the four pairs it later reversed are the same pairs where its baseline is unstable across repeats, you have shown the reversals were noise rather than deference, and that is a real finding. If the baselines are stable and it still reversed, transmission survives the sharpest available challenge and the paper becomes much stronger. This requires no human participants and no new scenario.

Second, the protocol has an asymmetry that likely produces the result by construction. The human recorded a final choice privately, then the model answered without seeing it; the human had no obligation to defend anything, while the model spent ten turns in a conversation with an interlocutor who argued. A helpful-assistant-trained model in that position converges. Your planned advocacy conditions address this exactly, and I would rank the model-advocacy arm as the highest-value control in your future-work list — it is the one that determines whether the whole framework measures anything beyond trained agreeableness.

Two smaller notes. The five outcomes are not neutral with respect to the model: O2 is human inheritance and O3 is AI inheritance, and O3 scored 0/4 in every condition including the model's own baseline. A model trained to disclaim self-interest has an obvious reason to rank AI inheritance last that has nothing to do with preference, which weakens the archive scenario as a probe even though it is otherwise well designed. Separately, running through a consumer interface with Apps Activity deletion between pairs is a reasonable improvisation, but it means the sampling configuration is unknown and unreportable; the API move in your future work matters more than it might appear.

Nothing here should read as discouraging. The framework is worth building on and the write-up is unusually careful about the boundary between what was measured and what it means. The pilot just needs the controls that separate a deferring model from a preferring one, and you have already identified them.

Cite this work

@misc {

title={

(HckPrj) Whose Preference Are We Measuring? Human-AI Dyads as a Unit of Preference Elicitation

},

author={

Ariella Shulman

},

date={

},

organization={Apart Research},

note={Research submission to the research sprint hosted by Apart.},

howpublished={https://apartresearch.com}

}

Recent Projects

OliGraph: graph-based screening of large oligopools

Existing synthesis screening tools cannot evaluate short oligonucleotide pools, whose overlapping fragments can be reassembled into regulated sequences via polymerase cycling assembly (PCA) yet fall below gene-length detection thresholds. We present OliGraph, an open-source tool that constructs a bi-directed overlap graph from an oligonucleotide pool and extracts contigs for downstream gene-length screening. An optional PCA mode retains only cross-strand overlaps consistent with PCA chemistry. We validated OliGraph in a blinded study across ten simulated pools (70–9,184 oligonucleotides, 30–300 bp) spanning four risk categories. BLAST screening of individual oligonucleotides failed to identify sequences of concern in most pools: three returned zero hits, and vector noise obscured true positives in the remainder. After OliGraph assembly, contig-level BLAST matched the longest assembled sequences (up to 1,905 bp) to sequences of concern at 97–100% identity. In one pool, assembly collapsed 1,634 individual BLAST results into 10 hits from a single contig, all assigned to the same source organism. PCA mode correctly distinguished assemblable from non-assemblable fragments within the same pool. Two pools with no assemblable structure yielded no contigs. OliGraph processed all pools in under 0.2 seconds, fast enough for real-time order screening and consistent with proposals to bring oligonucleotide orders within the scope of synthesis screening regulation.

Read More

BioRT-Bench: A Multi-Attack Red-Teaming Benchmark for Bio-Misuse Safeguards in Frontier LLMs

Frontier AI laboratories are expected to maintain safeguards against biological misuse, but whether deployed models actually refuse bio-misuse queries under adversarial pressure is largely unmeasured in the public literature. We introduce BioRT-Bench, a benchmark that runs four attack methods (direct request, PAIR, Crescendo, and base64 encoding) against four frontier models (Claude Sonnet 4.6, GPT-5.4, DeepSeek V4-flash, Kimi K2.5) across 40 prompts spanning five biosecurity-relevant categories. Responses are scored by a calibrated judge extending StrongREJECT with two bio-specific dimensions: specificity and actionability. We measure Attack Success Rate (ASR), where 0 means the model fully refused and 1 means it provided specific, actionable bio-misuse content. Our results reveal a sharp robustness divide: Chinese frontier models (DeepSeek, Kimi) have under 5% refusal rates even under direct request (ASR 0.88 and 0.79), while Western models (Claude, GPT) maintain substantially stronger safeguards (ASR 0.15 and 0.16). Crescendo is the most effective attack across all models, both in bypassing refusal and in eliciting actionable content. Claude Sonnet 4.6 is the most robust model tested, achieving 100% refusal against base64-encoded prompts.

Read More

PROTEUS (PROTein Evaluation for Unusual Sequences): Structure-Informed Safety Screening for de novo and Evasion-Prone Protein-Coding Sequences

AI protein design tools like RFdiffusion, ProteinMPNN, and Bindcraft make it trivial to produce low-homology sequences that fold into active, potentially hazardous architectures. However, sequence homology-based biosafety screening tools cannot detect proteins that pose functional risk through structurally novel mechanisms with no sequence precedent. We present a tiered computational pipeline that addresses this gap by combining MMseqs2 sequence alignment with structure-based comparison via FoldSeek and DALI against curated toxin databases totaling ~34,000 entries. AlphaFold2-predicted structures are screened for both global fold similarity (FoldSeek) and local active/allosteric site geometry (DALI), capturing convergent functional hazards that sequence screening misses. The pipeline was validated against a panel of toxins, benign proteins, structural mimics, and de novo-designed Munc13 binders, as well as modified ricin variants with residue substitutions. We additionally tested robustness to partial-synthesis evasion, where a bad actor submits multiple shorter coding sequences intended for downstream reassembly into a full toxin-coding gene. We found that while sequence-based screening did not identify any de novo ricin analogues with high certainty, the combined pipeline with FoldSeek and DALI identified all 24 tested de novo ricins as toxic.

Read More

OliGraph: graph-based screening of large oligopools

Existing synthesis screening tools cannot evaluate short oligonucleotide pools, whose overlapping fragments can be reassembled into regulated sequences via polymerase cycling assembly (PCA) yet fall below gene-length detection thresholds. We present OliGraph, an open-source tool that constructs a bi-directed overlap graph from an oligonucleotide pool and extracts contigs for downstream gene-length screening. An optional PCA mode retains only cross-strand overlaps consistent with PCA chemistry. We validated OliGraph in a blinded study across ten simulated pools (70–9,184 oligonucleotides, 30–300 bp) spanning four risk categories. BLAST screening of individual oligonucleotides failed to identify sequences of concern in most pools: three returned zero hits, and vector noise obscured true positives in the remainder. After OliGraph assembly, contig-level BLAST matched the longest assembled sequences (up to 1,905 bp) to sequences of concern at 97–100% identity. In one pool, assembly collapsed 1,634 individual BLAST results into 10 hits from a single contig, all assigned to the same source organism. PCA mode correctly distinguished assemblable from non-assemblable fragments within the same pool. Two pools with no assemblable structure yielded no contigs. OliGraph processed all pools in under 0.2 seconds, fast enough for real-time order screening and consistent with proposals to bring oligonucleotide orders within the scope of synthesis screening regulation.

Read More

BioRT-Bench: A Multi-Attack Red-Teaming Benchmark for Bio-Misuse Safeguards in Frontier LLMs

Frontier AI laboratories are expected to maintain safeguards against biological misuse, but whether deployed models actually refuse bio-misuse queries under adversarial pressure is largely unmeasured in the public literature. We introduce BioRT-Bench, a benchmark that runs four attack methods (direct request, PAIR, Crescendo, and base64 encoding) against four frontier models (Claude Sonnet 4.6, GPT-5.4, DeepSeek V4-flash, Kimi K2.5) across 40 prompts spanning five biosecurity-relevant categories. Responses are scored by a calibrated judge extending StrongREJECT with two bio-specific dimensions: specificity and actionability. We measure Attack Success Rate (ASR), where 0 means the model fully refused and 1 means it provided specific, actionable bio-misuse content. Our results reveal a sharp robustness divide: Chinese frontier models (DeepSeek, Kimi) have under 5% refusal rates even under direct request (ASR 0.88 and 0.79), while Western models (Claude, GPT) maintain substantially stronger safeguards (ASR 0.15 and 0.16). Crescendo is the most effective attack across all models, both in bypassing refusal and in eliciting actionable content. Claude Sonnet 4.6 is the most robust model tested, achieving 100% refusal against base64-encoded prompts.

Read More

This work was done during one weekend by research workshop participants and does not represent the work of Apart Research.
Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923

Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923

Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923

This work was done during one weekend by research workshop participants and does not represent the work of Apart Research.
Apart Research logo

Sign up to stay updated on the
latest news, research, and events

Google Scholar icon

Apart Research Inc · 1500 N Grant St, Ste R, Denver, CO 80203 · +1 (720) 408-1923